Description

A&D FX-123 Reloading Scale – 122g x 0.001g – 1882GN x 0.02GN with 100 gram Texan-Tested Calibration Weight

The A&D FX-123 is a compact external-calibration precision balance for ammunition reloading, laboratory work and quality-control applications that require fast, repeatable milligram-level weighing. It has a 122 g capacity, 0.001 g readability and typical stabilization of approximately one second when set to FAST under suitable conditions.

This MNM Scales package includes a 100 g external calibration weight. A&D lists 100 g as an applicable adjustment weight for the FX-123. The calibration weight is supplied by MNM Scales and is not listed as a standard A&D factory accessory. AutoTrickler equipment and connection cables are not included unless separately identified in the order.

Why choose the A&D FX-123?

• Milligram readability: 0.001 g resolution for detecting small differences in powder charges, components and samples.
• Fast response: Typical stabilization of approximately one second in FAST mode under suitable conditions.
• Compact Super Hybrid Sensor: A&D’s C-SHS weighing system combines a compact footprint with repeatable performance.
• Draft protection: The included small breeze break helps reduce the effect of moving air around the weighing pan.
• Impact protection: Impact Shock Detection warns the operator about potentially harmful impacts, while overload protection helps protect the sensor.
• Connectivity: Standard RS-232C and USB interfaces support compatible data and equipment connections.
• Five-year U.S. balance warranty: Subject to A&D’s current U.S. warranty terms and eligibility requirements.

A&D FX-123 specifications

*Repeatability and stabilization can vary with environmental conditions and operator technique.

What is included

• A&D FX-123 precision balance
• 100 g external calibration weight supplied with this MNM Scales package
• Small breeze break
• Main-unit protective cover
• AC adapter

Precision reloading and weighing applications

• Measuring and verifying ammunition powder charges
• Sorting bullets, cartridge cases and other reloading components by weight
• Use with a compatible AutoTrickler V4 system
• Laboratory and quality-control weighing of small samples
• Counting, percent weighing and comparator/check-weighing tasks

AutoTrickler V4 compatibility

AutoTrickler’s official compatibility FAQ specifically lists the new A&D FX-123 for use with AutoTrickler V4. Follow the AutoTrickler instructions for the required balance settings and connection. The AutoTrickler system is not included with this listing.

Setup and calibration guidance

Place the FX-123 on a solid, level surface away from vibration, direct airflow, rapid temperature changes, static electricity and magnetic fields. The FX-123 is externally calibrated and does not contain an internal calibration weight. Recalibrate after installation, relocation or meaningful changes in the operating environment by following the A&D instructions.

Frequently asked questions

Does the A&D FX-123 weigh in grains?

Yes. A&D lists grain (gr) among the FX-123’s supported weighing units.

Is the FX-123 compatible with AutoTrickler V4?

Yes. AutoTrickler’s official compatibility FAQ specifically lists the new FX-123. The AutoTrickler and any required cable are sold separately unless a listing expressly says otherwise.

Does the FX-123 have internal calibration?

No. The FX-123 uses external calibration. This MNM Scales package includes a 100 g adjustment weight. A&D’s corresponding FZ models use an internal weight.

Is this FX-123 NTEP certified or legal for trade?

This standard FX-123 listing is not presented as an NTEP-certified legal-for-trade model. Contact MNM Scales if your application requires a certified legal-for-trade balance.

Is the standard FX-123 IP65 rated?

No. IP65 protection applies to the separate FX-123WP model, not the standard FX-123 offered here.

Related MNM Scales resources

• Browse A&D precision balances
• Replacement 100 g calibration weight
• Scale service and calibration
• Contact MNM Scales