RADWAG SAL/STONE/H Anti-Vibration Table, Stone Top, Stainless Steel, WX-001-0079

Description

RADWAG SAL/STONE/H

The RADWAG SAL/STONE/H is a stainless steel anti-vibration weighing table with a heavy stone top that sits on a vibration damper, isolated from the outer frame. It gives microbalances, analytical balances and moisture analyzers a stable base, so floor and bench vibration stop showing up as drifting or slow readings.

The SAL/STONE/H is built as two separate structures. The outer AISI304 stainless steel frame forms the table you lean on and write at, and the inner working part holds the stone top on a vibration damper. Because the stone does not touch the outer frame, bumps against the table and vibration from the floor are not passed to the balance.

The table weighs 215 kg, and that mass is what makes it stable. The large 1000 x 650 mm surface holds several balances side by side, it carries up to 150 kg, and the adjustable feet with rubber tips let you level it on an uneven floor. Stainless steel suits clean rooms, pharmaceutical labs and areas that are wiped down often.

For more pricing information, including quotes on more than one unit, call us at (832) 290-3120 or send us a note through our contact page.

RADWAG SAL/STONE/H Key Features

• Stone weighing top separated from the table by a vibration damper
• Outer frame and inner working part built as separate structures
• AISI304 stainless steel frame for clean and wet-wipe areas
• Large 1000 x 650 mm surface with room for several balances
• 150 kg load-bearing capacity
• 215 kg net weight that resists bumps and floor vibration
• Adjustable feet with protective rubber tips for leveling
• 2-year RADWAG warranty

RADWAG SAL/STONE/H Specifications

What You Can Use the SAL/STONE/H Table For

• Microbalances and ultra-microbalances that read to 1 µg or finer
• Semi-micro and analytical balances (0.01 mg and 0.1 mg)
• Moisture analyzers that need a stable base during long drying runs
• Mass comparators and weight calibration
• Pipette calibration stations
• Precision balances in labs on upper floors or near machinery
• Shared weighing rooms that need several balances on one surface

Compatible RADWAG Instruments

RADWAG lists the SAL/STONE/H for its MYA and XA 5Y microbalances, AS X7 analytical balances, MA X7.IC.A and MA 5Y moisture analyzers, PS 5Y precision balances, WTC and WLC/C2 balances and its mass comparators. It is a natural base for the RADWAG XA 52.4Y.M.A microbalance, the RADWAG AS 220.3Y and the RADWAG AS 220.X2 PLUS, and it supports balances from any maker up to its 150 kg load.

How to Use the SAL/STONE/H Table

• Place the table on a solid floor, away from doors, vents and foot traffic where you can
• Level it with the adjustable rubber-tipped feet
• Set the balance on the stone top only, not on the outer frame
• Keep the outer frame for notebooks, tools and leaning
• Re-level the balance itself after moving the table

Who Buys the SAL/STONE/H Table

• Pharmaceutical and USP labs
• Microbalance and filter-weighing labs
• Calibration and metrology labs
• University and research labs
• Quality control labs on upper floors
• Clean rooms and stainless steel facilities

Manufacturer Information

See the RADWAG SAL/STONE/H datasheet for dimensions and compatibility. Browse more RADWAG products.

Frequently Asked Questions

What does the RADWAG SAL/STONE/H do?

It isolates the balance from vibration. The stone top sits on a vibration damper and is separated from the outer stainless steel frame, so bumps and floor vibration do not reach the balance.

What are the dimensions and load capacity?

The table is 1000 x 650 x 815 mm (L x W x H), carries up to 150 kg and weighs 215 kg.

Which balances can I use on it?

RADWAG lists microbalances, analytical balances, moisture analyzers, precision balances and mass comparators. It works with any balance that fits the top and its 150 kg load.

Is the frame stainless steel?

Yes. The frame is AISI304 stainless steel. The SAL/STONE/C is the powder-coated steel version.

How is the SAL/STONE/H shipped?

It ships by freight on a pallet because of its 255 kg gross weight. Call us at (832) 290-3120 for delivery options to your site.

Why Buy Your RADWAG Balance from MNM Scales?

MNM Scales is one of the largest scale distributors in the country, with one of the largest selections of laboratory balances, precision scales and industrial scales in every category. We offer free shipping in the continental U.S., in-house calibration and certificates, and real help choosing and setting up the right balance from our Houston-area team. Wholesale and volume buyers can contact us for a quote. Browse all RADWAG balances and scales or the full RADWAG lineup.