OHAUS SPX223 Manual, Explained: Setup, Keys, Modes and Calibration
The SPX223 manual, made simple: set up the OHAUS Scout SPX223, use the four keys and application modes, and calibrate it with the included 200 g span mass. The 220 g x 0.001 g SPX223 is in stock at MNM Scales for $668.00 (regular $1,157.00).
Short answer: the official OHAUS Scout SPX instruction manual (P/N 30268991) covers installation, the four keys, weighing and application modes, the Setup menu and span or linearity calibration for the whole Scout SPX line, including the OHAUS SPX223. This 220 g x 0.001 g portable balance uses a 3.7 in (93 mm) stainless pan, includes the ABS draft shield used on 1 mg Scout SPX models, and ships with its 200 g span calibration mass. MNM Scales is an authorized OHAUS dealer and stocks the SPX223 at $668.00 (regular $1,157.00). Add in-house calibration with a certificate for $95.00, or NIST calibration with a NIST-traceable certificate for $395.00, before it ships.
On sale: $668.00 (regular $1,157.00) on the SPX223 (#905), in stock. Contact us or call (832) 290-3120 with questions.
OHAUS Scout guides from MNM Scales
- OHAUS SPX223 manual: setup, keys, modes and calibration (you are here)
- OHAUS SPX222 manual
- OHAUS SPX421 manual
- OHAUS Scout SPX123 manual
- OHAUS Valor vs Ranger vs Scout
- OHAUS SJX1502N/E manual
- Portable scale buying guide
- Scale AC adapter
- How to calibrate a scale
- What NTEP and legal for trade mean
The OHAUS SPX223 (item 30253018) is the 220 g x 0.001 g model in the Scout SPX portable-balance line. It is a compact classroom, lab, field and production-check balance with a backlit LCD, 1.5-second stabilization and a 3.7 in stainless pan under an ABS draft shield. This page walks through the steps most users need from the official OHAUS Scout SPX instruction manual (P/N 30268991, revision C). Choosing a portable balance first? Start with our portable scale buying guide.
MNM Scales is an authorized OHAUS dealer. We sell, calibrate and repair all brands and types of scales, and we keep the SPX223 in stock so we can ship it with an in-house or NIST certificate when you want one on the balance.
SPX223 manual at a glance: specifications
| Item | OHAUS SPX223 |
|---|---|
| OHAUS item / model | 30253018 / SPX223 |
| Capacity x readability | 220 g x 0.001 g |
| Repeatability (std. dev.) / linearity | 0.002 g / 0.003 g |
| Stabilization time | 1.5 s |
| Pan | Ø 3.7 in (93 mm), 304 stainless steel |
| Draft shield | Yes (ABS draft shield used on 1 mg Scout SPX models) |
| Display | Backlit LCD, 0.78 in / 20 mm digits |
| Modes | Weighing, parts counting, percent weighing, check weighing, totalization, display hold |
| Weighing units (this model) | g, ct, N, oz, ozt, dwt, grn and a custom unit. kg, lb and lb:oz are not available on the SPX223. |
| Calibration | External span or linearity. Span mass 200 g (included). Linearity masses 100 g and 200 g. |
| Power | AC adapter (included) or 4 AA batteries (not included); typical battery life 80 hours. Replacement adapter: OHAUS 30330714, $48.00. |
| Operating temperature | 50 °F to 104 °F (10 °C to 40 °C), 10% to 80% RH, non-condensing, indoor use |
| Dimensions / net weight | 8.0 x 8.7 x 4.1 in (202 x 222 x 103 mm, W x D x H); 2.2 lb (1 kg) |
| Interface | Optional RS232, USB host, USB device, Ethernet or Bluetooth (sold separately) |
| Legal for trade | Non-NTEP (NTEP alternative: OHAUS AX223N/E) |
| In the box | Balance, ABS draft shield, round pan, AC adapter, instruction manual and the 200 g span calibration mass |
SPX223 vs SPX123
The OHAUS SPX123 is the 120 g sibling at the same 0.001 g (1 mg) readability. Both include the ABS draft shield, use the 3.7 in (93 mm) round pan, stabilize in 1.5 seconds and are typically rated for about 80 hours on 4 AA batteries. The SPX223 weighs up to 220 g and uses a 200 g span calibration mass (included). The SPX123 weighs up to 120 g and uses a 100 g span mass (included). Setup for that model is in the SPX123 manual. The 220 g x 0.01 g Scout, which has no draft shield, is covered in the SPX222 manual, and the 420 g x 0.1 g model is in the SPX421 manual.
Live prices at MNM Scales
| Model | Capacity x readability | Price |
|---|---|---|
| SPX223 (this guide) | 220 g x 0.001 g | $668.00 (reg. $1,157.00) |
| SPX123 | 120 g x 0.001 g | $543.99 (reg. $1,036.00) |
| SPX222 | 220 g x 0.01 g | $394.99 (reg. $752.00) |
| SPX421 | 420 g x 0.1 g | $258.00 (reg. $416.00) |
| AX223N/E (NTEP alternative) | 220 g x 0.001 g, NTEP Class II | $1,998.00 (reg. $2,440.00) |
| In-house calibration with certificate | Up to 2.2 kg tier | $95.00 |
| NIST calibration with NIST-traceable certificate | Up to 2.2 kg tier | $395.00 |
| OHAUS 30330714 AC adapter | SPX / SJX / CX replacement | $48.00 (reg. $99.00) |
Setting up the SPX223
- Use the balance indoors on a clean, firm surface, away from drafts, rapid temperature changes, vibration and magnetic fields.
- Release the red transportation lock on the sub-platform by turning the red pointer 90° counter-clockwise, to the unlocked position.
- The SPX223 includes the ABS draft shield used on 1 mg Scout SPX models. Assemble the components shown in the official manual, then set the round 93 mm pan straight down on the sub-platform.
- Level it: turn the adjustable feet until the bubble sits in the center of the illuminated level window on the front. Re-level it whenever you move the balance.
- Connect the included AC adapter to the jack at the rear, then to a compatible grounded outlet. To run on batteries, install four AA cells (not included) with the polarity marked in the compartment. A replacement adapter is the OHAUS 30330714 ($48.00); see our scale AC adapter guide if you are matching a plug.
- Press and hold On/Zero for one second to turn the balance on. It runs a display test, shows the software version and enters the active weighing mode. After power-on, warm it up for at least 5 minutes before you rely on a reading. Press and hold the same key until OFF appears to shut it down.
- When you first install the balance, or after you move it, perform a span calibration with the included 200 g mass (see SPX223 calibration below).
A security slot at the rear accepts an optional cable lock (not included). The security switch on the underside must be in the unlocked position to calibrate or to change units; when it is locked, the Calibration menu is hidden and the current unit is locked.
Controls, modes and units
The SPX223 has four keys. A short press (under one second) runs the primary function; a long press (more than two seconds) runs the secondary function. In the menu, the same keys become Yes, No, Back and Exit.
| Key | Short press | Long press | In the menu |
|---|---|---|---|
| On/Zero | Turns the balance on, or zeros it | Turns the balance off | Yes (accept) |
| Sends the current value to an optional interface if Auto-Print is off | Units: steps through the enabled weighing units | No (next item / reject) | |
| Function | Starts the current application function (for example, store a total or begin Hold) | Mode: changes the application mode | Back |
| Tare | Enters or clears a tare | Menu: opens the user menu | Exit (also aborts a calibration in progress) |
Press and hold Mode to reach Weigh, Count, Percent, Check, Totalization or Hold. Weighing is the factory default: tare a container if you need one, then add the sample. In counting, you can build or reuse an average piece weight from a 5, 10, 20, 50 or 100 piece sample (press Function to view the current APW). Percent weighing compares a sample to a stored 100% reference. Check weighing compares a sample to stored low and high limits, including positive, negative and zero-check setups. Totalization stores a series of positive weights; Hold can capture the first stable reading (Display Hold, the default) or the highest stable reading (Peak Hold), each at or above 5d.
On the SPX223, the official unit table lists gram (220 x 0.001), carat (1,100 x 0.005), newton (2.15744 x 0.00001), ounce (7.76030 x 0.00005), troy ounce (7.07320 x 0.00005), pennyweight (141.463 x 0.001) and grain (3,395.12 x 0.02), plus a custom unit. Kilogram, pound and pound:ounce are not available on this model. Availability can also depend on region.
OHAUS SPX223 calibration
OHAUS recommends a span calibration the first time you use the balance, and again after you move it, so the reading stays accurate at the new location. Have the correct masses ready and set the security switch to the unlocked position before you start.
Span calibration (zero and span)
- Press and hold Menu until the menu prompt appears, then release. When C.A.L is shown, press Yes.
- When SpaN is shown, press Yes to start span calibration.
- The display shows –C– while it stores the zero reading, then shows the calibration weight value (press No if you need to toggle the value).
- Place the specified 200 g mass on the pan. The display shows –C– while it stores the span reading, then done if the calibration succeeded. The balance returns to the previous application mode.
To abort a calibration in progress, press Exit. If calibration fails, the balance shows CAL E: check that you used the 200 g mass, that the pan is clear at zero, and that the bench is firm and draft-free, then retry. Scout Err 8.x and CAL E codes are listed in our scale error codes guide.
Linearity calibration (zero, mid-point and span)
From the Calibration menu, choose LIN instead of SpaN. Linearity calibration stores a zero, a mid-point and a span. For the SPX223, the official masses are 100 g and 200 g. The included 200 g span mass covers the span point; have a 100 g mass ready for the mid-point. Use both masses when you run a linearity calibration.
In-house or NIST calibration before it ships
The SPX223 is well under 2.2 kg, so it uses this service calibration tier. Add either option to the order and our TDA-registered technicians calibrate it in-house before it ships:
| Service | Price | What you get |
|---|---|---|
| In-house calibration with certificate (NIST-tested weights) | $95.00 | Certificate with the balance, using our NIST-tested weights |
| NIST calibration with NIST-traceable certificate | $395.00 | NIST-traceable certificate with the balance |
Add in-house calibration for $95.00 or NIST calibration for $395.00. See in-house vs NIST certificates if you are choosing a certificate level, and how to calibrate a scale for the general steps. Calibration is usually completed in 1 to 3 business days.
Already own an SPX223? We calibrate balances on-site across Houston and its suburbs at $295 plus $2 per mile round trip (scale calibration in Houston), and nationwide by mail with mail-in scale calibration, in-house or NIST. See how often a scale should be calibrated and what scale calibration costs.
NTEP status for the SPX223
The OHAUS SPX223 is non-NTEP. OHAUS lists Legal for Trade as not applicable on this Scout SPX model, and it is used for classroom, lab, field and general weighing rather than buying or selling by weight. If you need a legal-for-trade 220 g x 0.001 g balance, here is an NTEP alternative: the OHAUS AX223N/E Adventurer, 220 g x 0.001 g, NTEP Class II, Certificate of Conformance 14-082A4 (Active), e = 0.01 g, d = 0.001 g or 0.01 g, 130 mm pan, $1,998.00 (regular $2,440.00), in stock. Read what NTEP and legal for trade mean, or check a model with our legal-for-trade scale checker.
Error codes and a reset
If the display shows an error such as Err 8.3 (overload), Err 8.4 (underload, often a pan that is off the sub-platform) or CAL E (calibration did not complete), see our scale error codes guide for the Scout Err 8.x and CAL E list. To reset Setup, Mode or Unit items to factory defaults, use the Reset item inside that menu, or see the Scout reset notes in OHAUS Valor vs Ranger vs Scout.
Ready to order? The OHAUS SPX223 is in stock at $668.00 (regular $1,157.00), with the 200 g span mass in the box. Add in-house or NIST calibration before it ships, or ask us for a calibration quote. Questions? Call (832) 290-3120.
Shop the SPX223 (#905) Call (832) 290-3120 Get a quote
Frequently asked questions
Where can I get the SPX223 manual?
A printed OHAUS Scout SPX instruction manual (P/N 30268991) ships in the box with the SPX223. This guide walks through the setup, keys, modes and calibration steps most users need from that manual. The same manual also covers other Scout SPX models, including the SPX222, the SPX421 and the SPX123.
How do I calibrate the OHAUS SPX223?
Unlock the security switch, press and hold Menu until C.A.L appears, press Yes, then Yes on SpaN. Confirm the zero reading, place the included 200 g calibration mass on the pan, and press Yes if prompted. The display shows done when span calibration succeeds. MNM Scales, an authorized OHAUS dealer, offers in-house calibration with a certificate for $95.00 or NIST calibration with a NIST-traceable certificate for $395.00, nationwide by mail, plus on-site service in the Houston area at $295 plus $2 per mile round trip.
What calibration weight does the SPX223 use?
The official Scout SPX manual (Table 6-1) specifies a 200 g span mass for the SPX223, and calibration weights are included with Scout SPX models up to 620 g capacity. Linearity calibration uses 100 g and 200 g; have a 100 g mass ready for the mid-point.
Is the OHAUS SPX223 NTEP?
The SPX223 is non-NTEP. Here is an NTEP alternative: the OHAUS AX223N/E Adventurer, 220 g x 0.001 g, NTEP Class II, Certificate of Conformance 14-082A4 (Active), $1,998.00, in stock.
How do I set up the SPX223 for the first time?
Release the red transportation lock (turn the pointer 90° counter-clockwise), assemble the draft shield, set the round 93 mm pan straight down on the sub-platform, level the balance, connect the included AC adapter or install 4 AA batteries (not included), warm it up for at least 5 minutes, and run a span calibration with the included 200 g mass.
What is the difference between the SPX223 and the SPX123?
Both are 0.001 g (1 mg) Scout SPX portable balances with the ABS draft shield, a 3.7 in (93 mm) pan, 1.5-second stabilization and about 80 hours of typical battery life. The SPX223 weighs up to 220 g and uses a 200 g span mass. The SPX123 weighs up to 120 g and uses a 100 g span mass. The SPX223 is $668.00; the SPX123 is $543.99. Both are in stock.
What weighing units does the SPX223 have?
On this model the official unit table lists gram, carat, newton, ounce, troy ounce, pennyweight, grain and a custom unit. Kilogram, pound and pound:ounce are not available on the SPX223.
