Calibration Weight 50 gram For A&D EJ-54D2

Description

50 g calibration weight for the A&D EJ-54D2

This 50 g calibration weight for the A&D EJ-54D2 supports external calibration of the dual-range balance. A&D specifies 50 g as the EJ-54D2 factory-set calibration value. The calibration mass is sold separately from the balance.

Confirm the weight requirements for your procedure

Before ordering, confirm whether your quality system, laboratory method or internal procedure requires a particular weight class, tolerance, material or calibration certificate. Those attributes are not stated on this listing, so they should not be assumed.

• Confirm the exact balance model is A&D EJ-54D2.
• Check the weight class or tolerance required by your procedure.
• Determine whether a calibration certificate is required.
• Handle and store the weight according to the applicable procedure to limit contamination or damage.

Pair it with the EJ-54D2 balance

See the A&D EJ-54D2 dual-range balance for capacity, readability, package contents and optional interface details. If you need help confirming the correct calibration accessory, contact MNM Scales before ordering.

Calibration weight questions

Does the A&D EJ-54D2 use external calibration?

Yes. The EJ-54D2 is an external-calibration balance, and A&D lists 50 g as the factory-set calibration value.

Is a 50 g calibration weight included with the balance?

No calibration mass is listed in A&D’s standard EJ-54D2 package contents. This weight is offered separately.