Scale Calibration & Repair in Austin, TX
Scale and balance calibration for Austin and Central Texas, by mail-in or with an on-site visit by request. Austin’s labs run on precise balances, and MNM Scales calibrates them in our Cypress lab near Houston with an in-house or NIST-traceable certificate. For larger sites, our TDA-registered technicians travel to Austin on request, quoted per trip.
Chips, Life Sciences and Medtech
Austin has been a semiconductor town for decades, and new fabs in Austin and nearby Taylor have grown that cluster further. Around the chip plants sit equipment suppliers and specialty chemical firms. The city also has a fast-growing life science and medical device sector, from research labs near the university to device makers along the I-35 corridor in Round Rock and beyond, and an electric-vehicle assembly plant east of the city with its supplier network.
These are weighing-intensive industries in a quiet way. Chemists weigh reagents in milligrams, device makers verify component weights, and quality teams document every balance for audits. Austin’s craft breweries, coffee roasters and food makers add counters and packaging lines that sell by net weight.
Austin Industries and Their Balances
| Industry | What gets weighed | Instruments | Class |
|---|---|---|---|
| Semiconductor and chemicals | Reagents, wafers | Semi-micro, analytical | I |
| Life science labs | Samples, media | Analytical, precision | I / II |
| Medical devices | Components | Precision balance | II |
| Vehicle supplier plants | Parts, kits | Counting, bench | III |
| Breweries, roasters, food | Ingredients, packages | NTEP bench | III |
Moisture analyzers like the A&D MX-50 check materials and food products, and semi-micro balances such as the A&D BA-125DTE weigh to 0.01 mg. Both are calibrated in our lab and ship back with a certificate. See our guide to micro and semi-micro balances.
Mail-In Balance Calibration From Austin
Most Austin customers choose mail-in for lab balances, moisture analyzers and bench scales. It covers instruments from any manufacturer or seller.
- Email or call with your instrument list: model, serial number, and the certificate your quality system expects.
- Prepare each balance for travel. Engage any transport lock, take out the weighing pan and draft-shield glass, and wrap them separately.
- Send the box to Cypress with a note naming the lab contact who should receive the certificate.
- Your balances come back adjusted and documented, typically 1 to 3 business days after they reach us.
Learn more about NIST-traceable certificates and internal versus external calibration.
Keeping Lab Balances Honest Between Calibrations
A calibration certificate shows the balance was right on the day it was tested. In a cleanroom or research lab, what happens in between matters as much. Run a daily check with a known weight and log it, and let the balance warm up before the first reading. Keep it away from air vents and doors, and use an anti-static ionizer for powders and plastic vessels in dry winter air. When the daily check starts to wander, that is the time to send it in, not after a failed audit.
Repairs and Parts
- Balances that fail internal calibration or drift, diagnosed and repaired in our shop.
- Cracked draft shields, pans and displays, replaced where parts are available.
- Bench and floor scales with load cell or indicator faults, repaired in-shop or on a scheduled visit.
Repairs are quoted per job, and each repaired instrument is calibrated before it ships back.
On-Site in Austin by Request
For a lab with many balances that cannot leave the bench, or floor scales at a plant, our technicians can travel to Austin on request. Each visit is quoted per trip from your instrument list, address and preferred dates. On an on-site visit, our technicians bring their own certified test weights. Retail counters and packaging that sell by weight need scales that meet NIST Handbook 44 and are suitable for their use, usually NTEP-approved models; see legal-for-trade calibration.
Related Pages
- Balance calibration, mail-in calibration and scale repair.
- San Antonio and all scale services.
Austin Scale Service FAQ
Do you offer on-site calibration in Austin?
Yes, on request. Call for a quote; each trip is quoted based on the site and the number of instruments.
Can I mail in an analytical balance?
Yes. Lock the transport screw if it has one, remove the pan and pack it well. We return it calibrated, usually within 1 to 3 business days after arrival.
Do you calibrate moisture analyzers?
Yes. We calibrate the weighing system of moisture analyzers with certified weights.
Do you provide NIST-traceable certificates for audits?
Yes, with as-found and as-left readings for each test point.
Can you repair a balance that fails internal calibration?
Usually. We diagnose it in our shop and quote the repair before work starts.
Do you calibrate scales for breweries and roasters?
Yes. Bench and floor scales can be mailed in or serviced on an on-site trip by request.
Get an Austin Quote
Call (832) 290-3120 (24/7) or send your instrument list.